Bird Feeder / Bird Bath made of Weatherproof Corten Steel
The bird feeder is made of high quality weatherproof Corten steel, which forms a natural rust patina on the surface. This forms a protective layer against further rusting. Thanks to this reddish-brown coloring, the modernly designed birdhouse blends harmoniously into a natural garden.
Due to its wide shape, the bird feeder offers enough space for one or two bowls or plates to offer food and water to the birds. A frost-resistant porcelain bowl is included upon request.
Two wooden poles on the side of the birdhouse serve as a landing place for the birds. In addition, titmouse dumplings can be hung from them.
There is also a hanging version of this birdhouse with a steel cable – see below.
This birdhouse also comes in a non-rusty stainless steel version – see below.
Upon delivery, the birdhouse is already somewhat pre-rusted. The full patina is formed under the influence of rain, dew and humidity. The rusting process can be accelerated by occasionally pouring water over the birdhouse.
Notes about setting up the bird house:
The scope of delivery includes a stand in the form of a dismountable stainless steel pole with an earth spike 1.50 metres long. This stand can be inserted into the ground or – which is recommended for the balcony – into a large flower pot.
If the stand is not required, we can deliver the bird house without the stand for a price reduction. Please contact us for this.
The stand is sufficient to anchor the bird house solidly and out of reach of cats under normal weather conditions. In the event of a strong storm, the bird house must be secured in good time.
It should be noted that the total height of the erected bird house depends on how deep the stand is inserted into the ground. The stability also depends on the strength of the soil. When installing in regions with a particularly stormy climate or very loose soil, we recommend installing with a wooden stake or post.
In order to anchor the bird house even deeper (and thus more securely) or to obtain a greater installation height, we offer an extension piece with a length of 50 centimetres – see below.
As an alternative to the ground spike, we offer a square concrete base weighing eleven kilograms (see below), which is suitable not least for the terrace or balcony. The stand included with the bird house is fixed in the concrete base by means of a metal sleeve. We recommend this base (available in two colours) for small to medium-sized birdhouses and for installation in sufficiently wind-protected areas.
Due to its wide shape, the bird feeder offers enough space for one or two bowls or plates to offer food and water to the birds. A frost-resistant porcelain bowl is included upon request.
Two wooden poles on the side of the birdhouse serve as a landing place for the birds. In addition, titmouse dumplings can be hung from them.
There is also a hanging version of this birdhouse with a steel cable – see below.
This birdhouse also comes in a non-rusty stainless steel version – see below.
Upon delivery, the birdhouse is already somewhat pre-rusted. The full patina is formed under the influence of rain, dew and humidity. The rusting process can be accelerated by occasionally pouring water over the birdhouse.
Notes about setting up the bird house:
The scope of delivery includes a stand in the form of a dismountable stainless steel pole with an earth spike 1.50 metres long. This stand can be inserted into the ground or – which is recommended for the balcony – into a large flower pot.
If the stand is not required, we can deliver the bird house without the stand for a price reduction. Please contact us for this.
The stand is sufficient to anchor the bird house solidly and out of reach of cats under normal weather conditions. In the event of a strong storm, the bird house must be secured in good time.
It should be noted that the total height of the erected bird house depends on how deep the stand is inserted into the ground. The stability also depends on the strength of the soil. When installing in regions with a particularly stormy climate or very loose soil, we recommend installing with a wooden stake or post.
In order to anchor the bird house even deeper (and thus more securely) or to obtain a greater installation height, we offer an extension piece with a length of 50 centimetres – see below.
As an alternative to the ground spike, we offer a square concrete base weighing eleven kilograms (see below), which is suitable not least for the terrace or balcony. The stand included with the bird house is fixed in the concrete base by means of a metal sleeve. We recommend this base (available in two colours) for small to medium-sized birdhouses and for installation in sufficiently wind-protected areas.
Material: Corten steel, stainless steel, wood
Made in Germany
Dimensions of the feeding station: 48 x 30.5 x 19.5 cm
Height of the base: 150 cm
Optional porcelain bowl: height 3.7 cm, Ø 21 cm
Made in Germany
Dimensions of the feeding station: 48 x 30.5 x 19.5 cm
Height of the base: 150 cm
Optional porcelain bowl: height 3.7 cm, Ø 21 cm