Upright Stirling Model Engine with Tattoo Decor
The piston of this charming Stirling model engine is situated upright. The connection rod reaching in from above therefore reminds of a tattooing needle when the engine is running. Consequently, the base is decorated with a hinted-at tattoo pattern. The lovingly crafted piece of engineering purrs like a cat and delights technology fans as well as nostalgics and fans of steampunk design.
The engine draws the heat needed for running from a spirit flame whose distance to the engine can be changed, which enables you to control the running speed. At full speed the engine makes up to 2000 revolutions per minute.
The engine consists of 69 individual parts. The model sits on a base plate made of either light or dark wood.
This engine can be used to drive the passive accessory machines.
By request the engine can be delivered in larger versions with two, three or four cylinders which are synchronized and sitting next to each other.
The engine is made locally in Germany and consists of 95 percent self-produced parts.
This engine comes either fully assembled or delivered as a kit in individual parts. The kit for self-assembly is recommended for adults with manual skills, a steady hand and at least two hours of time.
In principle, a Stirling engine works by means of two pistons which are located in cylinders of different temperature and connected to the flywheel. Air can flow back and forth between the cylinders. In the colder cylinder, the air contracts and sucks the piston inwards. As a result, the piston pushes the cold air over into the warm cylinder where it heats up, expands and pushes the warm piston outwards. Together they move the flywheel which will now turn over its vertex and reverse the kinetic energy. With its momentum the flywheel pushes the warm piston back into the warm cylinder and pulls the cold piston out of the cold cylinder. As a result, the air flows back from the warm cylinder into the cold one. It contracts - and the cycle begins again.NOTES:
BEWARE: This engine model is being operated with methylated spirit which represents a danger to life in children's hands. The engine is NOT a child's toy and may only be operated by adults or under their supervision.
The engine must only be operated with clear uncolored methylated spirits with an alcohol content of 94 percent.
The model car is not made for perpetual use. After 15 to 20 minutes of running time it needs to take a break and cool down.The golden color parts are raw polished brass. They will darken over time and develop a beautiful authentic patina. This is not a defect and does not affect the functionality. The onset of patina can be removed by polishing if desired.
With long and frequent use of the engine, it will eventually be necessary to clean moving parts such as ball bearings, cylinders, pistons and spindle. Instructions for this are included.
Material: stainless steel, brass, aluminum
Made in Germany
Length: 156 mm
Width: 108 mm
Height: 150
Weight: 1000 g
Made in Germany
Length: 156 mm
Width: 108 mm
Height: 150
Weight: 1000 g